Lincoln Traps - Infinity Rabbit/Chandelle/Teal - Trap Machine

The Infinity Rabbit / Chandelle trap is one of the specialty machines offered in the Lincoln Automatic lineup.

The Infinity Rabbit/Chandelle trap is a commercial-grade machine, designed to reliably throw a Standard or Rabbit target in a variety of presentations. Four interchangeable arms are available to allow for standard and high angle presentations of regular domed targets as well as rabbit targets. Rabbit/Chandelle machines can add an extra level of difficulty to any commercial or home range. This machine is great for sporting clays courses, 5–stands, and personal use.

Here's the cleaned Rabbit / Chandelle listing with all Lincoln Traps routing and outbound links removed. Arm part numbers are kept as plain text spec info.

Adjustments The Rabbit / Chandelle is a manually adjusted machine. Once adjusted to the desired position, it will continue to replicate the same target flight path. All position and spring tension adjustments can be done with a ¾" wrench. The machine has a total of 25° of tilt adjustment and 75° of total elevation adjustment.

Easily Switch Between Rabbit and Chandelle Switching between Rabbit and Chandelle presentations takes only a few minutes. It is as simple as switching the arm and adjusting the target brushes. No need to remove the side shield or change the launch plate.

There are four arms available for this machine:

• Standard Rabbit Arm Assembly (AL554A) — included with the AR2002.
• High Angle Rabbit Arm Assembly (AL554HAA) — available as an accessory.
• Chandelle Arm (AL454A) — included with the AR2002.
• High Angle Chandelle Teal Arm (AL454HA) — available as an accessory.

The Standard Rabbit Arm and Chandelle Arm come with the machine. The High Angle Rabbit Arm and the High Angle Chandelle Teal Arm can be purchased as accessories.

The Standard Rabbit Arm allows for a traditional rabbit target presentation along the ground or an arcing target above the ground. The High Angle Rabbit Arm allows a rabbit target to be thrown at a nearly vertical trajectory to the machine. The Chandelle Arm allows the machine to throw a standard domed target on edge in an arcing presentation. The High Angle Chandelle Teal Arm allows the machine to throw a standard domed target higher into the air, up to a nearly vertical trajectory.

Springs Three different springs are available for this trap. The Gray spring yields the slowest target speed and shortest throwing distance. The Yellow spring results in moderate target speed and throwing distance. The Blue spring provides the fastest target speed and furthest throwing distance. One spring is included with each machine; however, springs can be changed at any time for additional versatility. Spring choice is selected at the time the order is placed.

Trap Weights

• AR2002280 — 123 pounds
• AR2002360 — 129 pounds

Power All Lincoln Automatic machines require 12 Volt power, which can be supplied in multiple ways. Batteries are a common method of powering machines; the ODYSSEY ODX-AGM24M is recommended, but similar battery models are also suitable. The minimum battery requirement is a Marine Grade Deep Cycle Group 24 with a minimum of 500 CCA and 800 MCA. A Group 27 or 31 sealed battery is recommended for best performance.

Batteries require charging, which can be done using a plug-in battery charger or a regulated solar panel. Solar panels add convenience as they eliminate the need to move batteries from machines to chargers. A regulated 20-watt solar charging kit (SW25WA) is available and works with any 12 VDC battery.

If the machine will be located in a house or near a power source, a transformer is an option for powering the machine. The PM45A transformer package is compatible with all Lincoln Automatic machines.

Warranty A 5 year warranty is offered on the clutch, with a 2 year warranty on the rest of the machine. This warranty does not include normal wear items or damage due to weather or natural disasters. Technical support is available for the life of the machine.

Release Firing the machine is via a release cord or a Long Range Wireless Trap Release. Release cords can be made to custom lengths per customer request.

Magazine The Rabbit / Chandelle machine can be ordered with two different magazine options. The larger, more common magazine holds 360 rabbit targets or 400 standard targets. The smaller option holds 280 rabbit targets or 320 standard targets. As of February 2026, most units feature a new welded magazine design.